Centering Plates

The centering plates are design to fit specific tool holders and facilitate correct mounting and orientation of the tool holder. The centering plate sits in the tool holder as does the insert, and provides a surface to be referenced using a sensor or gauge. The results are used to reference against the axis of the part to be processed. The chart below identifies the tool holders that can be used with a particular centering plate.

Centering Plate

Used With Plate Height (L1) Plate Length (L2)
EDP# Description Tool Holder Size mm Inch mm Inch
99501 CP-1 3, 4, & 5 6 .236 50 1.969
99502 CP-2 6 & 8 10 .394 50 1.969
99503 CP-3 10 & 12 13 .512 60 2.362
99504 CP-4 14/16 18 .709 70 2.756
99505 CP-5 18/25 26 1.024 70 2.756