Swivel Ball-Bearing Point Set Screws

The set screws are used only in lathe without Y axis during eccentric bushing rotation to correct symmetry errors. Do not over-tighten ball-bearing point set screw. The ball-bearing point set screw must allow the tool holder to move up and down as the bushing is rotated. It is important to confirm the bolt requirements for the existing tooling to be used in the mounting of the tooling system.

EDP# Description Thread Length
99571 BB-1 M 6 x 1.00 15mm
99572 BB-2 M 8 x 1.25 18mm
99573 BB-3 M 10 x 1.5 23mm
99574 BB-4 M 12 x 1.75 26mm
99575 BB-5 M 14 x 2.00 30mm
99576 BB-6 M 16 x 2.00 33mm
99577 BB-7 UNC 5/16-18 37/64
99578 BB-8 UNC 3/8-16 5/8
99579 BB-9 UNC 1/2-13 3/4
99580 BB-10 UNC 5/8-11 36/64